Measurement guide · shoes, clothing and accessories

Choose a HubBuy size from measurements—not from a familiar label.

Compare a product chart with an item that already fits, verify the selected variant and use QC measurement photos to resolve the questions that can change your choice.

Use the sizing method ↓

Direct answer

How should you choose a size from a HubBuy spreadsheet?

Measure an item you already own, compare the same dimensions with the current product chart and confirm the chosen option on the live listing. Use the size label only after the centimetres support it.

A HubBuy spreadsheet can help you find shoes, T-shirts, hoodies, jackets, trousers and belts, but it cannot create one universal size chart. Two products marked “L” can have different chest widths, lengths and cuts. A familiar EU shoe size can also hide different internal-length recommendations. The reliable comparison unit is the actual measurement and its method.

The four layers of size evidence

Evidence
How to use it
Your reference item
Measure a shoe or garment that already fits the way you want. This becomes the practical baseline.
Current size chart
Confirm the units, anchor points and selected variant on the current listing.
QC measurement photo
Check that the tape is flat, starts at the correct point and shows both ends of the measurement.
Fit preference
Record whether you want close, regular, relaxed or oversized fit; the same measurement can serve different preferences.

A six-step HubBuy sizing workflow

  1. Identify the exact item and variant. Size charts can differ between similar colourways, batches or product options. Do not reuse a chart from another row without confirming it belongs to the same listing.
  2. Choose a reference item. Pick something you already wear comfortably and that matches the intended product type and fit.
  3. Measure the reference consistently. Lay garments flat without stretching; measure shoes and belts using the method named below.
  4. Read the chart labels and units. Separate garment measurements from body measurements and centimetres from inches.
  5. Allow for construction and preference. Stretch, insulation, layering, rise and cut can change how the same width feels.
  6. Verify with current evidence. Recheck the selected option and request a targeted QC measurement when one uncertain value would change the decision.

HubBuy shoe size guide

Begin with foot length measured while standing, then compare it with the product’s recommended foot-length range. If a QC photo shows an insole, confirm that it is removable, laid flat and measured from the deepest heel point to the longest toe point. Outsole length is not interchangeable with internal length.

Shoe field
What it means
Foot length
Your heel-to-longest-toe measurement; useful as the starting input.
Recommended foot length
The seller’s stated range for a size. Confirm whether socks or extra room are already considered.
Insole length
Internal removable insert length when measured correctly; it may include space beyond the foot.
Outsole length
Exterior sole measurement; it should not be used as though it were usable internal space.
Width or last shape
Toe-box and midfoot shape can matter even when the length appears suitable.

For a focused shortlist, open the HubBuy shoes spreadsheet and keep exact model, size system, recommended foot length and available QC measurements in separate fields.

HubBuy T-shirt, hoodie and jacket sizing

Chest width

Measure straight across the garment from armpit to armpit while it lies flat. Some charts use full chest circumference instead, which is roughly twice a flat width but should still be confirmed from the chart label. Do not compare a half-chest value with a circumference value.

Body length

Use the same starting point—commonly high shoulder near the collar—to the hem. A back-length measurement and a front-length measurement may differ on shaped garments.

Shoulder and sleeve

Measure shoulder seam to shoulder seam when clear seams exist. Sleeve length may start at the shoulder seam, collar or centre back, so read the chart diagram. Raglan sleeves cannot be compared reliably with a standard shoulder-to-cuff number unless the method matches.

Layering and garment structure

A T-shirt baseline may not leave enough room for a fleece hoodie or insulated jacket. Compare the product with an existing garment of the same type, not with a body measurement or unrelated top.

HubBuy pants and trousers sizing

Record relaxed waist, rise, thigh, inseam, outseam and leg opening. Elastic waists should be measured both relaxed and, when provided, at a sensible maximum. A waist circumference derived from a flat width should use the same point and tension as the chart.

  • Waist: flat across the waistband without stretching.
  • Front rise: crotch seam to top of the front waistband.
  • Thigh: straight across at the chart’s stated point below the crotch.
  • Inseam: crotch seam to the inside hem.
  • Outseam: top of waistband to hem along the outside leg.
  • Leg opening: flat width at the hem for taper comparison.

HubBuy belt and bag measurements

For belts, total strap length, width and the usable range from buckle point to first and last holes matter more than an S/M/L label. Measure a comfortable belt from the same buckle point to the hole you actually use. For bags, record external length, height and depth plus handle drop; product photos alone can make capacity look larger than it is.

How to read a QC measurement photo

  • Confirm the photographed item is the selected product and option.
  • Check that the tape or ruler starts at the intended anchor point rather than outside the item.
  • Look for both ends of the measurement and readable units.
  • Reject a reading taken across folds, heavy wrinkles or a stretched elastic section unless that is the stated method.
  • Allow a reasonable measurement tolerance, but do not invent a universal number; use the current listing or service policy when one is given.

Use the full HubBuy QC photos guide to inspect construction and variant identity before treating a measurement image as evidence.

A sizing record you can compare later

Record field
Example of useful evidence
Intended fit
Regular hoodie with room for one light layer.
Reference item
Flat chest, body length, shoulder and sleeve from a hoodie that already fits.
Listing method
Centimetres; garment measured flat; chest shown as half width.
Chosen variant
Colour and size confirmed on the current product page.
QC confirmation
Measurement photo available, readable and tied to the selected item.
Uncertainty
Fabric stretch, tolerance or an unconfirmed measurement kept as an open question.

HubBuy spreadsheet sizing FAQ

How do I choose a size from a HubBuy spreadsheet?

Start with an item you already own and like, measure it using the same method shown in the listing, then compare the actual centimetres. Treat the letter or regional size as a label until the current product page and measurement evidence agree.

Can I use my normal US, UK or EU size?

Use it only as a search starting point. Brand labels, product cuts and measurement methods vary, so confirm the current size chart and compare garment or foot measurements before choosing.

What shoe measurement matters most?

Foot length and usable internal length are more useful than one familiar size number. Check whether the listing shows insole length, outsole length or recommended foot length because those are different measurements.

What should I measure for a hoodie or T-shirt?

At minimum compare flat chest width and body length. Shoulder width and sleeve length also matter for structured or long-sleeve garments. Use the same anchor points on your reference garment and the product chart.

Can QC photos confirm fit?

They can confirm a measurement when a tape is positioned clearly, but they cannot prove comfort or how the item will fit your body. Photos should support the size chart, not replace your own reference measurements.

Apply the measurements

Shortlist the size whose current evidence matches your reference item.

Browse product categories